Aerotwin is always dependable even at high speeds: Perfect visibility is guaranteed by the aerodynamic design – whatever the weather conditions. The tailor-made spring strip ensures top-quality wiper action over the full area.
Aerotwin advantages at a glance
Optimum wiper performance without any smears
Features particularly quiet operation on wet and almost dry windshields
Increased service life, even in extreme heat or cold
Provides optimum visibility thanks to its aerodynamic design, even at high speeds
Original-equipment quality
Can be retrofitted very easily and fitted in the blink of an eye
“Tested on your car” by comprehensive vehicle-specific tests
When should you get new wiper blades?
This depends on how often you use your windscreen wipers and the different conditions your car is exposed to. Rubber deteriorates in hot, cold, wet or dry weather, so we recommend changing your wipers every 12 months, or if you experience any of the following:
Juddering on the screen
Noise or squeaking across both dry and wet screens
The blade feels worn down or has notches when you run a finger down it
Your blade leaves streaks or unwiped areas on the windscreen
How to fit wiper blades
Step One: Lift up your wiper arm from the screen
Step Two: Unclip the old wiper blade, either by sliding the blade out of the clip system or pulling it gently off the arm. Be very careful not to let the arm snap back onto the windscreen, as this could cause damage.
Step Three: Clip your new wiper blade onto the arm, taking care to ensure there’s a firm ‘clicking’ noise or feeling. Give it a wiggle to make sure it’s secure.
Step Four: Replace the arm and blade slowly onto the windscreen. If it doesn’t look straight, or the whole blade doesn’t sit on the glass, then it hasn’t been fitted correctly.
Repeat the process for the other three (or more) wiper blades on your car.
Aerotwin is always dependable even at high speeds: Perfect visibility is guaranteed by the aerodynamic design – whatever the weather conditions. The tailor-made spring strip ensures top-quality wiper action over the full area.
Aerotwin advantages at a glance
Optimum wiper performance without any smears
Features particularly quiet operation on wet and almost dry windshields
Increased service life, even in extreme heat or cold
Provides optimum visibility thanks to its aerodynamic design, even at high speeds
Original-equipment quality
Can be retrofitted very easily and fitted in the blink of an eye
“Tested on your car” by comprehensive vehicle-specific tests
When should you get new wiper blades?
This depends on how often you use your windscreen wipers and the different conditions your car is exposed to. Rubber deteriorates in hot, cold, wet or dry weather, so we recommend changing your wipers every 12 months, or if you experience any of the following:
Juddering on the screen
Noise or squeaking across both dry and wet screens
The blade feels worn down or has notches when you run a finger down it
Your blade leaves streaks or unwiped areas on the windscreen
How to fit wiper blades
Step One: Lift up your wiper arm from the screen
Step Two: Unclip the old wiper blade, either by sliding the blade out of the clip system or pulling it gently off the arm. Be very careful not to let the arm snap back onto the windscreen, as this could cause damage.
Step Three: Clip your new wiper blade onto the arm, taking care to ensure there’s a firm ‘clicking’ noise or feeling. Give it a wiggle to make sure it’s secure.
Step Four: Replace the arm and blade slowly onto the windscreen. If it doesn’t look straight, or the whole blade doesn’t sit on the glass, then it hasn’t been fitted correctly.
Repeat the process for the other three (or more) wiper blades on your car.
DELIVERY
